Converting front bumper - AZ88.00-P-0001-02I

Preparation 

1. Remove standard bumper, radiator grill.

Assembly 

2. Install radiator grill
3. Install inner carrier and impact damper
4. Press retaining lugs (B) into anchoring at top and bottom.
5. Anchor side support plates in exterior surface using spreading rivets.
   Fig 1: Identifying Retaining Lugs

   
6. Rivet inner side member included with parts kit to exterior surface with pop rivets (A).
   Fig 2: Identifying Pop Rivets

   
7. Hook center grill in front apron and fasten with screws included (arrows).
8. Insert outer grills.
   Fig 3: Identifying Center Grill Screws

   
9. Install headlamp:
   • Fasten headlamp mount to original mounting points (C).
   • Fasten headlamp to mount (D) and to lug (E).
   • Insert adapter cable into headlamp.
10. Install bumper.
    Fig 4: Identifying Headlamp Mounting Points, Mount And Lug