Notes on testing pneumatics, diagnosis, advanced information, PSE - AD80.20-P-2000-06A
- Before testing the safety switching time of ancillaries, interrupt the voltage supply to the PSE for ≥3 seconds.
- Following the test on the PSE , interrupt the voltage for approx. 3 seconds (erasing safety memory)
- After completion of the test on the PSE , no pressure or vacuum should be demanded for approx. 10 min.
Parts for testing
| 1 | Reservoir | 107 800 08 19 |
| 1 | Distributor fitting | 117 078 01 45 |
| 1 | Rubber hose, 50 mm | 007 997 61 82 |
| 1 | Socket | 202 800 03 53 |
| 1 | Socket | 202 800 05 53 |
| 2 | Pneumatic line, 1 m | 000 158 14 35 |
| 8 | Rubber cap | 000 987 11 45 |