Notes on anti-theft alarm (ATA) - AD80.50-P-2000-01A

The central locking system and the ATA can only be externally actuated using the radio frequency remote control for central locking (except ). Unlocking and locking the vehicle using the mechanical key has no effect on the central locking and the ATA.

and : continued external operation of central locking and ATA using mechanical key possible.

PSE actuation 

The cable from the radio frequency DAS control module (N54/3) is connected to the combined function control module (N10-3). The relevant signals are transmitted to the PSE via two CAN data cables by the combined function control module (N10-3).

• The ATA functions are integrated in the pneumatic control module (combined) (A37).
• The pneumatic control module (combined) (A37) fault memory is integrated in the combined function control module (N10-3).
• Variant coding must be carried out after replacing the pneumatic control module (combined) (A37).
• A quick function check can be carried out using the HHT by means of actuations and actual values.
• Headlamp activation (afterglow time) can be coded (only ).