Switching off anti-towing sensor, function - GF80.50-P-3024C
MODEL 170 with CODE (551a) Anti-theft alarm (ATA)
MODEL 170 up to 31.5.98 with CODE (552a) Anti-theft alarm (ATA) for Switzerland
The anti-towing sensor (TS) can be switched off with the anti-towing sensor/status indicator switch (S85/3) in the center console.
Switch-off must be accomplished with the anti-theft alarm (ATA) deactivated and ignition switched off (circuit 15 off).
Press the switch up to switch off the TS . Actuation of the switch is registered by the PSE control module (combined) (A37).
After releasing the switch successful switch-off is indicated by the LED in the switch coming on continuously for two seconds. When the ATA is activated the next time the TS remains off.
- Switching off the TS feature is effective only for one ATA activation period. If desired it must be switched off again before activating the ATA again.
| Anti-towing sensor/status indicator switch, location/purpose/design/function | GF80.50-P-4108A |