Locking status confirmation, function - GF80.30-P-3005A

MODEL 129, 140 as of 1.6.97 

MODEL 170 as of 1.6.97 except CODE (491) US version except CODE (498) Japanese version 

MODEL 170 as of 1.2.97 with CODE (491) US version 

MODEL 170 as of 1.3.97 with CODE (498) Japanese version 

The locking status of the radio frequency/infrared DAS control module is confirmed by the turn signals. The radio frequency DAS control module (N54/3) or the radio frequency/infrared DAS control module (N54/4) transmits a ground signal to the combination relay or the lock confirmation relay.

Lock confirmation relay models 129/140 

Radio frequency/infrared DAS control module (N54/4) ↓ combination relay (N10/2) ↓ turn signals

Lock confirmation relay model 170 

Radio frequency DAS control module (N54/3) ↓ lock confirmation relay (K54) ↓ turn signals

When the hazard warning flasher is switched on the turn signals are not actuated.

When vehicle is locked 

the turn signals flash 3 times at a frequency of 1.5 Hz.

When vehicle is unlocked 

the turn signals flash once

If desired by customer the programming for confirmation with the turn signals can be cancelled with the version coding feature using the handheld tester.

Unlocking or locking the vehicle manually with the driver's door lock cylinder or the trunk lid lock cylinder also triggers an unlocking or locking procedure.

In this case the turn signals are not actuated.

	Remote control key with transponder, purpose/design/function		GF80.30-P-4001B
	Pneumatic system equipment (PSE), purpose/design/function/location		GF80.30-P-4004A
	Infrared remote control receiver, purpose/function/location	MODEL 129, 140	GF80.30-P-4009A
	DAS radio frequency/infrared control module, purpose/location	MODEL 129, 140	GF80.30-P-4012A
	Lock confirmation relay, purpose/function/location	MODEL 170	GF80.30-P-4005A
	Remote control key, purpose/design /function	MODEL 170	GF80.57-P-4101B
	DAS radio frequency control module, purpose/location	MODEL 170	GF80.57-P-4105A