Detach/attach lower engine compartment paneling - AR61.20-P-1105A

Model 170 

Model 170 

Fig 1: Identifying Guide Pin

Model 170 with retrofitted stationary heater 

Fig 2: Identifying Exhaust Line, Exhaust Muffler And Engine Compartment Paneling

	Remove
1	Unscrew screws in bottom engine compartment paneling (arrows)
2.1	Loosen pipe clamp from exhaust line (14a)	Only on vehicles with retrofitted stationary heater
3.1	Remove exhaust line (14a) from exhaust feed through (14b)	Only on vehicles with retrofitted stationary heater
4	Remove lower engine compartment paneling
	Install
5.1	Install exhaust line (14a) on exhaust feed through (14b)	Only on vehicles with retrofitted stationary heater
6.1	Fasten pipe clamp to exhaust line (14a)	Only on vehicles with retrofitted stationary heater
7	Install lower engine compartment paneling.	Model 170: Pay attention to pilot stud (a).
8	Install screws in bottom engine compartment paneling (arrows)