Removing and installing lens in headlamp unit - AR82.10-P-1820EA

MODEL 170, 202 up to 31.8.96, 210 except CODE (491) U.S. version 

Model 170 

Fig 1: Identifying Lens In Headlamp Unit Remove/Install Components - Model 170

Model 202 

Fig 2: Identifying Lens In Headlamp Unit Remove/Install Components - Model 202

Model 210 

Fig 3: Identifying Lens In Headlamp Unit Remove/Install Components - Model 210

	Removal
1	Remove headlamp unit	Model 170 without Xenon headlamps (code 612b)	AR82.10-P-4730EC
		Model 170 with Xenon headlamps (code 612b)	AR82.10-P-4730EDD
		Model 202	AR82.10-P-4730EA
		Model 210	AR82.10-P-4730EB
2	Pull off gasket (20)
3.1	Remove retaining clips (37)	Model 170
3.2	Unclip retaining tabs (38)	Model 202, 210
4	Remove lens (39)
	Installation
5	Check gasket (21) for damage
6	Position lens (39)	Ensure that lens is properly seated. The lens forms a unit with the frame
7.1	Press in retaining clips (37)	Model 170
7.2	Clip in retaining tabs (38)	Model 202, 210 Retaining tabs must catch audibly
8	Install gasket (20)
9	Install headlamp unit	Model 170 without Xenon headlamps (code 612b)	AR82.10-P-4730EC
		Model 170 with Xenon headlamps (code 612b)	AR82.10-P-4730EDD
		Model 202	AR82.10-P-4730EA
		Model 210	AR82.10-P-4730EB