Cutting out windshield with cutting blades - AR67.10-P-1000-01G

Risk of injury from knife slipping off when clamping it in the multicutter and from glass splinters when cutting out bonded windows

Clamp/unclamp blade only with air supply shut-off. Wear protective gloves and goggles

AS67.00-Z-0001-01A

Fig 1: Identifying Cutting Blade (124 589 40 63 00)

Fig 2: Identifying Cutting Blade (124 589 03 63 00)

Commercially available tools

Number	Designation
WH58.30-Z-1003-20A	Multicutter

1. Clamp blade (124 589 40 63 00) into multi-cutter.
2. Moisten whetstone and sharpen both sides of blade with machine switched on.
3. Cut out window in area "A" from outside.
4. Clamp blade (124 589 03 63 00) into multi-cutter.
5. Moisten whetstone and sharpen both sides of blade with machine switched on.
6. Cut out window in area "B" from outside.
   Fig 3: Identifying Cut Out Window In Area "A" From Outside