Checking airbag mount in steering wheel - SM91.60-P-0001A

MODEL 129, 170, 202, 208 With steering wheel design R 170

OPERATION NO. OF OPERATION TEXTS OR OF STANDARD TEXTS AND FLAT RATES

Operation no.	Operation text	Basic work	Account number
02- 3131- 01	Removing airbag and checking color code	4 WU
02- 3132- 01	Checking tightening torque for mounting nuts and attaching color code, replacing nuts if necessary	2 WU

Fig 1: Checking Airbag Mount In Steering Wheel

G04744718

	Removal
	The mounting plate for the airbag is fastened with four nuts and marked during the production process.	It is possible that the color coding is not present!
1	Remove airbag	Do not disconnect electrical leads from airbag
		Models 170, 208	AR91.60-P-0660G
		Model 202	AR91.60-P-0660E
	Checking
2	Check whether color code is present	4 nuts (arrows) Color code not present ↓ Check tightening torque Airbag model 129 (M 6/ 8 Nm)
		Airbag models 170, 202, 208 (M 6) Mounting nuts (M4/ 6 Nm)	*BA91.60-P-1001-01A
4	Mark nuts checked	Color dot
	Installation
5	Install airbag
		Models 170, 208	AR91.60-P-0660G
		Model 202	AR91.60-P-0660E

TORQUE SPECIFICATION

AIRBAG

Number	Designation		Model 170	Model 202	Model 208
BA91.60-P-1001-01A	Screw for airbag on steering wheel	Nm	8	8	8

PARTS ORDERING NOTES

Part no.	Designation	Quantity
N 910 113 005 001	Nuts	4