Check seat belts and belt buckles for external damage and operation - AP91.40-P-9150Z
MODELS 124, 129, 140, 168, 170, 202, 208, 210
| Inspecting | |||
| 1 | Pull out seat belt to full length and check for signs of damage | such as cut fibers, chafing or other such faults if fault found, subject to separate repair order: ↓ | |
| + | Replace safety belt Model 124 |
ra91001240502x | |
| - | Model 129 | ra91001290502x | |
| - | Model 140 | ra91001400502x | |
| Model 168 | AR91.40-P-0630GC | ||
| Model 170 | AR91.40-P-0630G | ||
| Models 202, 210 | AR91.40-P-0630E | ||
| Model 208 | AR91.40-P-0630K | ||
| 2 | Check angular movement of safety belt | if faulty, check if the safety belt has been twisted behind the panel by 180°, subject to separate repair order: ↓ | |
| + | Remove and install panel Model 124 |
ra68001240470x | |
| - | Model 140 | ra68001400470x | |
| Model 168 | AR68.30-P-4700GC | ||
| Model 170 | AR91.40-P-0630G | ||
| Model 202 | AR68.30-P-4700E | ||
| Model 208 | AR68.30-P-4700K | ||
| Model 210 | AR68.30-P-4700F | ||
| 3 | Check locking function of inertia reel through rapid unwinding of belt | if fault found, subject to separate repair order: ↓ | |
| + | Replace safety belt Model 124 |
ra91001240502x | |
| - | Model 129 | ra91001290502x | |
| - | Model 140 | ra91001400502x | |
| Model 168 | AR91.40-P-0630GC | ||
| Model 170 | AR91.40-P-0630G | ||
| Models 202, 210 | AR91.40-P-0630E | ||
| Model 208 | AR91.40-P-0630K | ||
| 4 | Check that belt buckle engages | if fault found, subject to separate repair order: ↓ | |
| + | Replace belt buckle Model 124 |
ra91001240638x | |
| - | Model 129 | ra91001290630x | |
| - | Model 140 | ra91001400638x | |
| Model 168 | AR91.40-P-1515GC | ||
| Model 170 | AR91.40-P-1515G | ||
| Models 202, 210 | AR91.40-P-1515E | ||
| Model 208 | AR91.40-P-1515K |