Adjust side stops on trunk lid - AR88.50-P-5200-02G
Test and adjustment values, gap dimensions at hoods, doors and covers
| Number | Designation | Model 170 | |||
|---|---|---|---|---|---|
| BE60.00-P-1003-01A | Gap dimension | Trunk lid to top of rear fender | Dimension "F" | mm | - |
| Trunk lid to bottom of rear fender | Dimension "M" | mm | - | ||
| Trunk lid to rear fender | Dimension "F" | mm | 5.0 (+1/-0) | ||
| Trunk lid to taillamp | Dimension "M" | mm | 5.0 (+1/-0) | ||
| Trunk lid to bumper | Dimension "V" | mm | 8.0 (± 0.5) | ||
| Rear fender to taillamp | Dimension "U" | mm | 3.0 (± 0.5) | ||
| Fig., see | AR60.00-P-0700-01G | ||||
- Loosen mounting bolts on stops (8) and move stops completely toward inside
- Coat stops (9) in trunk lid opening with chalk
- Close trunk lid
Press trunk lid carefully backwards, do not slam!
- Check chalk imprint on stops (8)
- Adjust stops in increments toward outside until chalk marks uniform on both sides.