Installing play adjusters - AR46.15-P-0550-04A

Screw thrust pieces (92b) of play adjusters (92) lightly  (approx. 0.5 Nm at hexagon socket) into the jacket tube housing (81a) until they abut.

Fig 1: Identifying Play Adjusters And Jacket Tube Housing

The play adjuster consists of two parts which can be dismantled:

• Driver (92a) for attaching the control cables (93a) and
• the thrust piece (92b) with pressure component (92c)
  Fig 2: Identifying Control Cables, Driver, Thrust Piece And Pressure Component