Variant coding of pneumatic system equipment, diagnosis, advanced information, PSE - AD80.20-P-2000-08A

Models 140, 170 as of 6/97

PSE control module (combined) (A37) must be coded. Menu item 6 appears in the HHT. The PSE is to be coded accordingly.
Variant coding is menu-assisted

Coding options	Selection	Note
1. Locking is activated when starting off	YES	Automatic locking at V > 15 km/h (basic setting) If NO is entered here, the "Automatic locking" function can no longer be activated with the interior switch either.
1. Locking is activated when starting off	NO
2. Re-locking	YES	Vehicle is locked again after a certain time if a door is not opened after unlocking.
2. Re-locking	NO
3. Locking is activated via interior switch (CL) when starting off	YES	YES means that the "Automatic locking" function can be activated or deactivated with the interior switch (CL) (S6/1s2).
	NO
	Entry is only relevant if the basic setting "Locking is activated when starting off" is on YES (see above).