Removing and installing window lift mechanism in front door - AR72.10-P-1800GG

MODEL 170 as of 1.2.00 

Fig 1: Identifying Window Lift Mechanism In Front Door Remove/Install Components - Model 170 As Of 1.2.00

	Removal, installation
1	Remove crank operated window on front door		AR72.10-P-1900GA
2	Drill out rivets (3)	Remove rivet residues and chips from door.
3	Loosen screw (8)	Loosen screw (8) only until window lift mechanism (1) can be moved out of bracket (9).
4	Unscrew nut (6)
5	Unscrew nuts (4) from door bottom plate (5)	Plugs for sealing access holes to nuts (4).
6	Unclip power window motor (M10/3, M10/4) from inner door panel	Installation  : Fasten power window motor with three rivets.
N	Lift window lift mechanism (1), turn and lift out through assembly opening in inner door panel
8	Install in the reverse order
9	Carry out operational check