Adjusting steering gear in vehicle - AR46.20-P-0100A: Notes

MODEL 129, 140, 170, 202, 208 

Fig 1: Identifying Support And Torque Wrench

Fig 2: Steering Wheel Adjustment Measurements

	Removal, installation
1.1	Remove tie rod at pitman arm	Model 129	AR46.40-P-0200A
		Model 140	AR46.40-P-0200B
2.1	Remove drag link at pitman arm	Model 129	AR46.40-P-0100A
		Model 140	AR46.40-P-0100B
3.1	Remove combined tie rod and drag link at pitman arm	Model 1, 70, 202, 208	AR46.40-P-0100C
4	Assemble support (042a) on steering wheel, mount torque wrench (042b)	Support	Fig 3
		Torque wrench	Fig 4
	Checking
5	Determine friction torque of the steering gear by slowly turning the steering wheel from stop to stop several times.		*BE46.20-P-1001-01A
	Adjustment
6	Adjust friction torque of the steering gear		AR46.20-P-0100-01A

TEST VALUES OF STEERING GEAR

Number	Designation		Model 129	Model 140	Model 170	Model 202	Model 208
BE46.20-P-1001-01A	Overall friction torque of steering gear in center area	Ncm	100 - 160	100 - 160	100 - 160	100 - 160	100 - 160

STEERING GEAR

Number	Designation		Model 129	Model 140	Model 170	Model 202
BA46.20-P-1005-01A	Lock nut of friction torque adjusting screw on the steering worm	Nm	60	60	60	60

STEERING GEAR

Number	Designation		Model 208
BA46.20-P-1005-01A	Lock nut of friction torque adjusting screw on steering worm	Nm	60

Fig 3: Identifying Support (126 589 13 63 00)

Fig 4: Identifying Torque Wrench (123 589 02 21 00)

Fig 5: Identifying Box Wrench Set (123 589 01 03 00)

Fig 6: Identifying Socket Wrench (123 589 01 09 00)

Fig 7: Identifying Allen Key/Wrench Socket (123 589 01 10 00)