Replacing rubber windshield spacers - AR67.10-P-1000-02G

1. Glue rubber windshield spacers "A" on at high spots.
2. Attach rubber windshield spacers "B" approx. 170 mm from A-pillars.
3. Press spacer bracket "C" into gap in body flange at top center and left and right outside.
   Fig 1: Identifying Glue Rubber Windshield Spacers

   

Location top outside (arrow)

Fig 2: Identifying Glue Rubber Windshield Spacers - Location Top Outside

Location bottom outside

Fig 3: Identifying Glue Rubber Windshield Spacers - Location Bottom Outside

Location bottom center

Fig 4: Identifying Glue Rubber Windshield Spacers - Location Bottom Center