Removing and installing headlamp range adjustment control module - AR82.10-P-4081G

MODEL 170 as of 1.2.00 

Fig 1: Identifying Headlamp Range Adjustment Control Module Remove/Install Components

	Removal, installation
1	Remove cover below left of instrument panel		AR68.10-P-1500G
2	Disconnect 18-pin connector (2)
3	Unscrew screws (1)	The headlamp range adjustment control module (N71) is screwed on towards the rear of the vehicle.
4	Remove headlamp range adjustment control module (N71) from instrument panel carrier
5	Install in the reverse order