Removing and installing rubber on wiper blade - AR82.30-P-6250G

MODEL 170 

Fig 1: Identifying Wiper Rubber Blade Remove/Install Components

	Removal
1	Remove wiper blade (1)
2	Press retaining springs (2) back	Starting from closed side of profiled rubber
3	Pull retaining springs (2) completely out of rubber (3)
4	Unhook rubber (3) from retainers (4)
	Installation
5	Hook in rubber (3)	Do not hook inner retainer (4) into cutout in rubber (3) yet
6	Insert retaining springs (2)	From open side of rubber, arch should point toward window
7	Coat closed side of rubber (3) with solution of soap and water	This allows the retainers (4) and retaining springs (2) to catch more easily
8	Hook retaining springs (2) into recess
9	Press inner retainer (4) into recess (arrow)
10	Install wiper blade (1)