Remove/install bulbs of headlamp unit - AR82.10-P-1201CA

MODEL 170 with CODE (612) Xenon headlamp unit 

Fig 1: Identifying Headlamp Bulbs Remove/Install Components - Model 170 With Code (612) Xenon Headlamp Unit

	Remove/install
	Risk of death  caused by high voltage levels present at xenon headlamps. Risk of explosion/risk of fire  due to highly flammable materials in the area of damaged xenon bulbs Risk of injury  from UV light, hot components at xenon headlamps and glass splinters when xenon bulbs crack Risk of poisoning  from inhaling mercury vapors and from swallowing/skin contact with poisonous salts and mercury compounds	Do not come into contact with parts that are under high voltage. Persons with active electronic implants  (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulating safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure the work area is adequately ventilated.	AS82.10-Z-0001-01A
1	Remove lamp unit		AR82.10-P-4730EDD
2	Remove housing cover
3	Remove central connector (1)
4	Loosen bolts (2) and remove retaining plate (3)	The retaining plate (3) is unlocked by turning counterclockwise.
5	Carefully remove xenon bulb D2R (4)	Do not touch the glass of the bulbs with your bare fingers, instead use a grease-free, soft cloth. Ensure bulb is correctly installed.
6	Install in the reverse order