Removing and installing wiper motor - AR82.30-P-6800G: Notes

MODEL 170 

Fig 1: Identifying Wiper Motor Remove/Install Components (1 Of 2)

Fig 2: Identifying Wiper Motor Remove/Install Components (2 Of 2)

	Remove
	Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Withdraw ignition key
2	Remove wiper system		AR82.30-P-6400G
3	Unscrew nut (1) from wiper motor shaft
4	Press crank arm (3) off of wiper motor shaft
5	Unscrew screws (2) on wiper motor (M6/1)
6	Remove wiper motor (M6/1)
	Install
7	Move wiper motor (M6/1) to parking position		AR82.30-P-6800-01G
8	Install wiper motor
9	Screw in screws (2) for wiper motor (M6/1)		Fig 3
			*BA82.30-P-1001-01A
10	Align crank arm (3) and press on to wiper motor shaft	Pay attention to setting: Crank arm (3) must be parallel to and covered by wiper linkage (4)
11	Screw nut (1) onto wiper motor shaft		Fig 3
			*BA82.30-P-1002-01A
12	Install wiper system		AR82.30-P-6400G

Windshield wiper

Number	Designation		Model 170
BA82.30-P-1001-01A	Bolt to wiper motor fixing.	Nm	11
BA82.30-P-1002-01A	Nut on wiper motor shaft	Nm	26

Fig 3: Identifying Torque Wrench (000 589 67 21 00)