Removing and installing outside temperature indicator sensor - AR54.30-P-6341EB

MODEL 170, 202.0 as of 1.6.96, 202.07 /08 /18, 208, 210.0 as of 1.6.97, 210.2 /6 with CODE (240a) Outside temperature indicator 

Illustrated on model 170 

The location of the temperature sensor for the outdoor temperature indicator on model 202, 208 and model 210 is slightly below the location in model 170.

Fig 1: Identifying Outside Temperature Indicator Sensor Components - Model 170

	Removal, installation
	Outside temperature indicator sensor Location / Function		GF54.30-P-4104A
1	Disconnect ground lead from battery	On model 210 insulate cable terminal on ground lead to prevent accidental contact between disconnected ground lead and ground point W10	AR54.10-P-0003A
2.1	Remove engine compartment paneling	Model 208: Left section
3.1	Open installation flap for left fog lamp (E5/1)	Models 170, 202, 210
4	Disconnect electrical connector for outside temperature indicator temperature sensor (B14)
5	Unclip outside temperature indicator temperature sensor (B14) below front bumper
6	Reinstall in opposite order