Testing quiescent current - AR54.10-P-1030-03C

		If nominal value is not reached: ↓
		Determine circuit in which quiescent current consumption is too high	AR54.10-P-1030-04C

Fig 1: Identifying Electrical Connection Set (201 589 00 99 00)

Commercially available tools

Number	Designation
WH58.30-Z-1001-09A	Multimeter

Test step	Test instrument/Test connection	Action/Prerequisite	Nominal value	Possible cause/Remedy
		Observe multimeter limit for measuring current. When the central locking is actuated a current of approx. 10 A  flows.
1		Lock vehicle.	Display ≤ 0.05 A (50 mA) or ≤ 0,09 A (90 mA)
	W10 G1-	Wait approx. 10 minutes (after-running time for electronic components)	, vehicles with alarm system CODE 551. Nominal value reached: Perform test step 2 Alarm system active when LED in rotary light switch flashes Do not activate any other loads during the test, otherwise observe after-running time of 10 minutes again
2		Unlock vehicle.	Display ≤ 0.05 A (50 mA) or ≤ 0.09 A (90 mA)
	W10 G1-	Wait approx. 10 minutes (after-running time for electronic components)	, vehicles with alarm system CODE 551. Nominal value reached: End of test Alarm system inactive when LED in rotary light switch does not flash. Do not activate any other loads during the test, otherwise observe after-running time of 10 minutes again.