K1 and K2 line, location/purpose - GF54.30-P-2015A
MODEL 129, 140 as of 1.6.96, 170, 202 as of 1.8.96, 208 up to 31.7.99, 210 as of 1.6.96 up to 30.6.99
The K1 and K2 line connects the instrument cluster to the automatic air conditioning pushbutton control module.
The serial data line K1 supplies the air conditioning control module with the following information from the instrument cluster:
- Outside temperature
- Engine coolant temperature
- Driving speed of vehicle
- Terminal 58d (illumination)
- Engine speed
- °F/°C conversion
- Full load fuel shutoff (diesel-engined models)
- Acceleration recognition (gasoline-engined model)
As of 02.97 also:
- Compressor emergency stop
- Compressor shutoff when accelerating
The serial data line K2 supplies the air conditioning control module with the following information from the instrument cluster:
- Refrigerant pressure
- Idle speed increase