Removing and installing headlamp reflector - AR82.10-P-2850A

MODEL 129 except CODE (491) U.S. version except CODE (612b) Xenon headlamp unit 

Fig 1: Identifying Fog Lamp Reflector (2 Of 3)

	Removal, installation
1	Remove headlamp unit		AR82.10-P-4730A
2	Remove lamp unit bulbs		AR82.10-P-1201A
3	Remove lens of headlamp unit		AR82.10-P-1820A
4	Unclip retaining lugs (1)	Installation  : The retaining lugs should catch audibly.
5	Remove headlamp reflector (2)	Do not touch reflecting inner surfaces of headlamp reflector.
6	Install in the reverse sequence
7	Check and correct headlamp adjustment		AP82.10-P-8260A