ME-SFI idle speed function - GF07.61-P-2006AM

ENGINE 113.990 in MODEL 211, 219

ENGINE 113.991 in MODEL 215, 220

ENGINE 113.992 in MODEL 230

ENGINE 113.993 in MODEL 463

ENGINE 113.995 in MODEL 230

The following functions are active in idle:

ME-SFI diagnosis fault memory function		GF07.61-P-2004AM
ME fuel supply, function		GF07.61-P-3004AM
Motor electronics (ME) ignition system, function		GF07.61-P-3008AM
ME-SFI post-start enrichment function		GF07.61-P-3011AM
ME-SFI fuel pump actuation, function		GF07.61-P-3012AM
Purge control valve actuation, function		GF07.61-P-3013AM
ME engine speed signal, function		GF07.61-P-3017AM
ME-SFI safety fuel shutoff, function		GF07.61-P-3018AM
ME-SFI two-sensor control, function		GF07.61-P-3020AM
ME-SFI warming-up control, function		GF07.61-P-3022AM
Fan control, function		GF07.61-P-3023AM
O₂ sensor heater, function		GF07.61-P-3025AM
Engine oil information, function		GF07.61-P-3026AM
Fuel consumption signal, function		GF07.61-P-3029KE
Self-adjustment of mixture formation, function		GF07.61-P-3030AM
Correction programming, function		GF07.61-P-3031AM
ME-SFI TWC heating-up, function		GF07.61-P-3032AM
Smooth engine running analysis, function		GF07.61-P-3034AM
ME-SFI lambda control, function		GF07.61-P-4022AM
Overheating/pinging protection, function		GF07.61-P-4027AM
Voltage supply of ME-SFI control unit, function		GF07.61-P-5001AM
Air injection, function		GF14.30-P-3012AM
Anti-knock control function		GF15.12-P-4024AM
ME-SFI electronic accelerator, function		GF30.20-P-3012AM
Electronic accelerator pedal emergency running mode, function		GF30.20-P-4026AM
ME-SFI idle speed control, function		GF30.22-P-0003AM
Evaporative emission control system function		GF47.30-P-3013AM
Purge system with leak test function	At	GF47.30-P-3016AM
Catalytic converter efficiency monitoring function		GF49.10-P-3033AM