Chafe guard on rear window roller sun blind becomes loose resulting in noise or causing blind to stick during opening and closing - AF68.50-P-2002AG
MODEL 203.0## ## up to 571229 with CODE (540a) Electric roller blind for rear window
MODEL 215.### ## up to 043072 with CODE (540a) Electric roller blind for rear window
OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES
| Category | Op. no. | Operation text | Time | Acc. no. | Code |
|---|---|---|---|---|---|
| P | 024077 | Eliminate noise in area of electric roller blind | 003 WU | - | - |
| Damage code | Cause | Remedy | |
|---|---|---|---|
| 81 046 H2 | At high temperatures caused by solar radiation, the chafe guard may come loose due to insufficient attachment. | ||
This may cause noise to occur when the roller sun blind is opened and closed if the side bars of the scissor mechanism cross. |
1 Extend roller sun blind and remove chafe guard. | ||
| The roller sun blind may also get stuck on the protruding chafe guard and not retract completely. | 2 Glue felt strips in the place of the chafe guard. |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| A 203 983 00 10 | Felt strips for roller sun blind (rear window) | 1 |