Torque converter lockup clutch control pressure, function - GF27.60-P-3019G
TRANSMISSION 722.6
Apart from the extreme states of open or closed, it is possible to operate the torque converter lockup clutch with preset slip speeds. To enable this variable control pressure must be applied to the torque converter lockup clutch regulating valve.
The torque converter lockup clutch control pressure is adapted to each operating state via the pulse-width-modulated torque converter lockup solenoid valve (Y3/6y6) which is actuated by the ETC control unit (N15/3).
| Torque converter lockup clutch PWM solenoid valve, location/task/design/function | GF27.19-P-5112G | ||
| Torque converter lockup clutch, location/task/ design/function | Model 129, 140, 163, 170, 202, 203, 208, 209, 210,211,230,240 | GF27.20-P-5101G | |
| Models 215, 220 except code (479) cylinder shutoff | |||
| Model 215, 220 with code (479) cylinder shutoff | GF27.20-P-5101GA | ||
| Type 171.4 | GF27.20-P-5101SK | ||
| Model 199 | GF27.20-P-5101SLR | ||
| Torque converter lockup clutch regulating valve, location/task/function | GF27.60-P-5123G | ||
| ETC control unit, location/task | GF27.19-P-4012SLR |