Remove/install front door window - AR72.10-P-1910MB

MODEL 220.1 /8 with CODE (Z07) Top protection 

Fig 1: Identifying Front Door Window Remove/Install Components

	Remove/install
	Risk of injury caused by hands or feet being jammed or crushed when working on windshield or windows	Secure windows against dropping, use only specified lifting tools, wear protective shoes.	AS67.00-Z-0003-01A
	Notes on avoiding damage to windows installed in special high-security vehicles		AH67.00-P-0003-01FB
1	Close window (1)
2	Remove outer sealing rail		AR72.10-P-1700E
3	Remove front door lining		AR72.10-P-1000MB
4	Remove inner door panel		AR72.10-P-0104MB
5	Remove front door handle armor plate		AR72.10-P-2400-01MB
			*BA72.10-P-1002-01EA
6	Secure window (1) against dropping by applying clamping pliers.	Cover door frame in area of clamping pliers with suitable equipment to avoid damaging paint.
			Figure
7	Unscrew bolts (2) on window (1) from sliding rail (4) and remove reinforcement (3).	If necessary, lower window lifter slightly using the manual window lifter actuation (5).
		Installation:  Replace bolts (2) and secure with securing agent.	*BR00.45-Z-1011-02A
8	Lower window lifter down to end stop with manual window lifter actuation (5)
9	Remove window (1) of front door (6)		AR72.10-P-1920-01MB
			Figure
		Installation:  Install window (1) of front door (6)	AR72.10-P-1920-02MB
			Figure
10	Install in the reverse order

FRONT DOOR TIGHTENING TORQUE

Number	Designation		Model 220 with code Z07
BA72.10-P-1002-01EA	Bolt, door handle armor plate at window	Nm	28

Fig 2: Identifying Clamping Pliers (220 589 04 31 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1011-02A	Quick glue	A 003 989 31 71