Remove/install front door control module - AR72.29-P-1000M

MODEL 220 

Shown on model 220 up to VIN: 316716 

Fig 1: Identifying Front Door Control Module Remove/Install Components

	Remove/Install
1	Remove door control module (2) cover from door liner (4)	The mount was modified with model refinement as of VIN: 316716.
		Model 220 except 220 with code (Z04) Light armoring except 220 with code (Z07) Maximum protection	AR72.10-P-1000M
		Model 220 with code (Z04) Light armoring	AR72.10-P-1000MB
		Model 220 with code (Z07) Maximum protection	AR72.10-P-1000MC
			Figure
2	Unclip left front door control module (N69/1) or right front door control module (N69/2) from door control module cover (2)	Press retaining clips on front door control module together and simultaneously press front door control module out of door control module cover (2).
3	Install in the reverse order

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)