Headlamp and/or turn signal lamps not leaktight and fogged - AF82.10-P-4041BU
MODEL 220 up to 30.9.99
MODIFICATION NOTES
| 30.8.99 | Supersedes STIP 82.10-015 dated 17.8.99 |
| Damage code | Cause | Remedy | |
|---|---|---|---|
| 82 155 | Contact pressure of sealing cap seal insufficient | 1 Remove sealing caps on rear of headlamp | |
| 2 Install new sealing caps |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| 220 820 02 49 | Sealing cap low beam-turn signal lamp | As required |
| 220 820 03 49 | Sealing cap high beam-front fog lamp | As required |