Test specifications for wheel location, wheel hub - BE33.20-P-1000-01A
Model 129, 140, 170, 171, 202, 203, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230
MODIFICATION NOTES
| 25.7.06 | Wheel bearing play at front axle | Model 171 | |
| Wheel bearing play at front axle | Model 209 |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 129 | Model 140 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | 63 | |
| See picture | - | AR33.20-P-0500-02A | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | 0.05 | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | 0.03 | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | 0.05 | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 170 | Model 171 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | - | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | - | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | - | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 202 | Model 203 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | - | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | - | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | - | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 208 | Model 209 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | - | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | - | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | - | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 210 | Model 211 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | - | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | 0.03 | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | 0.05 | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 215 | Model 216 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | - | 0.05 | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | 0.03 | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | 0.05 | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 219.3 | Model 220 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | - | 0.05 | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | 0.03 | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | 0.05 | |
TEST SPECIFICATIONS FOR WHEEL LOCATION, WHEEL HUB
| Number | Designation | Model 221 | Model 230 | ||
|---|---|---|---|---|---|
| BE33.20-P-1001-01A | Test dimension "A" for adjusting the upper wishbone in the bearing shell | mm | - | - | |
| See picture | - | - | |||
| BE33.20-P-1002-01A | Wheel bearing play at front axle | mm | 0.01 to 0.02 | 0.01 to 0.02 | |
| BE33.20-P-1003-01A | Permissible runout of steering knuckle journal at bearing seat | mm | 0.05 | - | |
| BE33.20-P-1004-01A | Front wheel hub flange lateral runout | mm | 0.03 | 0.03 | |
| BE33.20-P-1005-01A | Radial runout on disk wheel alignment fitting of front wheel hub | mm | 0.05 | 0.05 | |