Removing and installing ATA alarm signal siren - AR80.50-P-9840M

MODEL 215, 220 with CODE (551a) Anti-theft alarm (ATA) 

Illustrated on model 220 

Fig 1: Identifying ATA Alarm Signal Siren Remove/Install Components - Illustrated On Model 220

	Removal, installation
1	Remove inner fender in front fender		AR88.10-P-1300M
2	Unscrew screw (3)
3	Unscrew nuts (2) and loosen mount (4)
4	Disconnect connector (1) from alarm signal siren with additional battery (H3/1)	Before disconnecting the siren ensure that the anti-theft alarm (ATA) is deactivated because otherwise the siren will be triggered (internal power supply from rechargeable battery)
5	Install in opposite order