Check rear axle camber - AR40.20-P-0331I

MODELS 215, 220 

	Inspecting
1	Check vehicle level at front and rear axles with electronic clinometer		AR40.20-P-0301I
2	Check rear axle camber	The camber on the rear axle is not adjustable. If substantial deviations in the rear axle camber are found, the cause may be one of the following: Too great a difference in vehicle level between right and left-hand sides of vehicle. Accident damage on frame floor. Level differences at mounting points for rear axle carrier between left and right body side. Experience shows that bending caused by an accident also has an effect on the toe. Camber at vehicle level: ↓
		Model 215 except	*BE40.20-P-1003-09E
		Model 215	*BE40.20-P-1004-09E
		Model 220 without 4MATIC except	*BE40.20-P-1001-09E
		Model 220 without 4MATIC	*BE40.20-P-1002-09E
		Note maximum permissible difference in rear-axle camber between the right and left-hand sides of the vehicle	*BE40.20-P-1005-09E
		Model 220 with 4MATIC except	*BE40.20-P-1001-09V
		Model 220 with 4MATIC	*BE40.20-P-1002-09V
		Note maximum permissible difference in rear-axle camber between the right and left-hand sides of the vehicle	*BE40.20-P-1003-09V

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 215 except
BE40.20-P-1003-09E	Camber at vehicle level	-2,3°	-1° 11 ' ±30 '
		-2.8°	-1° 17 '±30 '
		-3,3°	-1° 24 '±30 '
		-3,8°	-1° 31 '±30 '
		-4,3°	-1° 38 '±30 '
BE40.20-P-1005-09E	Permissible rear axle camber between right and left vehicle side	∠	30'

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 215
BE40.20-P-1004-09E	Camber at vehicle level	-1,3°	-0° 59 '±30 '
		-1,8°	-1° 05 '±30 '
		-2,3°	-1° 11 '±30 '
		-2.8°	-1° 17 '±30 '
		-3,3°	-1° 24 '±30 '
BE40.20-P-1005-09E	Permissible rear axle camber between right and left vehicle side	∠	30'

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 220 except except 4MATIC
BE40.20-P-1001-09E	Camber at vehicle level	-0,9°	-0° 55 '±30 '
		-1,4°	-1° 00 '±30 '
		-1,9°	-1° 06 '±30 '
		-2,4°	-1° 12 '±30 '
		-2,9°	-1° 19 '±30 '
BE40.20-P-1005-09E	Permissible rear axle camber between right and left vehicle side	∠	30'

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 220 except 4MATIC
BE40.20-P-1002-09E	Camber at vehicle level	+0.1 °	-0° 44 '±30 '
		-0.4°	-0° 49 '±30 '
		-0,9°	-0° 55 '±30 '
		-1,4°	-1° 00 '±30 '
		-1,9°	-1° 06 '±30 '
BE40.20-P-1005-09E	Permissible rear axle camber between right and left vehicle side	∠	30'

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Models 220.083/084/087/183/184/187 except
BE40.20-P-1001-09V	Camber at vehicle level	-2,1°	-1° 30 '±30 '
		-1,6°	-1° 25 '±30 '
		-1,1°	-1° 20 '±30 '
		-0,6°	-1° 15 '±30 '
		-1,1°	-1° 10 '±30 '
BE40.20-P-1003-09V	Permissible rear axle camber between right and left vehicle side	∠	30'

TEST VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 220.083/084/087/183/184/187
BE40.20-P-1002-09V	Camber at vehicle level	-1,6°	-1° 25 '±30 '
		-1,1°	-1° 20 '±30 '
		-0,6°	-1° 15 '±30 '
		-0,1°	-1° 10 '±30 '
		+0,4°	-1° 05 '±30 '
BE40.20-P-1003-09V	Permissible rear axle camber between right and left vehicle side	∠	30'