LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> S430 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle-- Testing & Repair -- 215 & 220 Chassis - 2 Of 2 >> Testing & Repair >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Pressing drive pinion out of rear axle housing - AR35.31-P-0550-07A

Pressing drive pinion out of rear axle housing - AR35.31-P-0550-07A

Fig 1: Identifying Puller (000 589 65 33 00)
G04636417
  1. Press drive pinion (47) lout of rear axle housing using puller (065) and remove.

    NOTES When prying off, hold drive pinion (47) SPECIAL TOOL and puller (065). The drive pinion or rear axle housing might otherwise be damaged.

    Shown: 198 mm dia. rear axle center assembly 

    Fig 2: Pressing Drive Pinion Out Of Rear Axle Housing - Shown: 198 Mm Dia. Rear Axle Center Assembly
    G04636418
scientia non olet · About LEMON Manuals