Removing and installing rear head restraints - AR91.16-P-1770E
MODEL 202 / / /, 208.3, 210, 220, 215 (except 202.07 /08 /18 /19)
Fig 1: Identifying Rear Head Restraints Remove/Install Components - Model 202 / / /, 208.3, 210, 220, 215 (Except 202.07 /08 /18 /19)
| Removal | |||
| 1 | Pull up head restraint (1) | ||
| 2 | Slide cover (2) toward front and simultaneously press against cover (2) on side with long wedge and lift | Fig 2 | |
| 3 | Press both arresting levers (arrows) with screwdriver and pull head restraint yokes (3) toward rear out of head restraint mount | ||
| 4 | Put head restraint (1) down to side | ||
| Installation | |||
| 5 | Install cover (2) on both head restraint yokes (3) | ||
| 6 | Insert both head restraint yokes (3) uniformly into mounts until catch on the head restraint yoke engages | ||
| 7 | Hook cover (2) into rear wall panel | ||
| 8 | Check head restraint retraction feature for proper function |
Special tool