Remove/install front seats - AR91.10-P-1000M

MODELS 220.0 /1 up to 31.8.02 

Fig 1: Identifying Front Seats Remove/Install Components - Models 220.0 /1 Up To 31.8.02 (1 Of 2)

Fig 2: Identifying Front Seats Remove/Install Components - Models 220.0 /1 Up To 31.8.02 (2 Of 2)

	Remove/Install
1	Remove head restraint (1)
2	Adjust front seat (2) to front
3	Remove cover (3) above belt end fitting (4)
4	Unscrew bolt (5) from seat belt end fitting (4)	Screw on belt end fitting Installation:  When screwing on ensure that the belt end fitting (4) remains mobile	*BA91.40-P-1001-01A
5	Unscrew screws (7) at rear of seat rails	Bolt on seat rail.	*BA91.10-P-1001-01H
6	Remove covers (6) at rear of seat rails
7	Position front seat (2) to rear
8	Unscrew screws (7) at the front of the seat rails	Bolt on seat rail.	*BA91.10-P-1001-01H
9	Remove covers (6) at front of seat rails
10	Detach plug socket of pneumatic line (8) and connector block for front left, right seat (X55/3, X55/4) on front cushion frame	The plug socket of the pneumatic line (8) has to be disconnected using an open-end wrench size 7.
11	Detach retaining clamp (9) for Bowden cable seat belt height adjustment at seat adjuster (10) in direction of arrow
12	Lift front seat (2) and remove
13	Install in the reverse order

FRONT SEATS

Number	Designation		Model 220 up to 30.11.01	Model 220 as of 1.12.01
BA91.10-P-1001-01H	Bolt to seat runner	Nm	50	45

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 220
BA91.40-P-1001-01A	Screw on belt end fitting	Nm	30

MODIFICATION NOTES

3.12.04

Supersedes STIP 91.60-023 dated 06.07.01