  |
Remove/Install |
|
|
 |
Risk of death
cased by vehicle slipping or toppling off of the lifting platform. |
Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. |
AS00.00-Z-0010-01A |
 |
Notes on repairs to brake system |
All models |
AH42.00-P-0003-01A |
| 1 |
Raise vehicle. |
|
|
| 2 |
Remove parking brake shoes |
Model 215 except 215.379, 220 except 220.179 |
AR42.20-P-0530I |
| |
|
Model 215.379, 220.179 |
AR42.20-P-0530IM |
| 3 |
Detach front brake cable (85) at intermediate lever (91) |
 Installation:
Install new self-locking bolt (93) |
|
| 4 |
Detach brake cables (86) from equalizer arm (92) |
|
|
| 5 |
Detach brake cables (86) from bracket on rear axle carrier |
Use snap-release tool (043) |
|
| |
|
Snap-release tool |
*129589116300 |
| 6 |
Unscrew self-locking bolt (98) on wheel carrier. |
Installation:
Install new self-locking bolt (98) |
|
| |
|
Self-locking bolt, brake cable to rear wheel carrier |
*BA42.20-P-1002-01A |
| 7 |
Remove brake cables (86) from wheel carrier |
|
|
| 8 |
Install in the reverse order |
Installation:
Install new grommet if necessary. |
|
| |
|
Lubricant |
*BR00.45-Z-1002-06A |