Distance, function - GF54.50-P-2008R

MODELS 203 up to 30.6.02, 208 as of 1.8.99, 210 as of 1.7.99, 215, 220 with CODE (494a) USA version

The trip computer allows the mileage traveled to be displayed

"SINCE START" (short-distance memory) and
"SINCE RESET" (long-distance memory)

Mileage "SINCE START" (short-distance memory), function

Activate the "SINCE START" display screen (short-distance memory) via the system selection button (S110s3) and scroll forward/back (S110s1) of the multifunction steering wheel.
The display shows the mileage traveled since the last reset of the short-distance memory, as well as the travel time, the average speed and fuel consumption.

Fig 1: Mileage Display Screen - Since Start (Short-Distance Memory)

Mileage "SINCE RESET" (long-distance memory), function

Activate the "SINCE RESET" display screen (long-distance memory) via the system selection button (S110s3) and scroll forward/back button (S110s1) of the multifunction steering wheel
The display shows the mileage traveled since the last reset of the long-distance memory, as well as the travel time, the average speed and fuel consumption.

The mileage is displayed in miles or in kilometers in the range from 0 - 40.959 miles (or 0 to 65.535 km)1 1 with a resolution of one mile or one kilometer.

After reset the first value change occurs after 1 km or 1 mile.

Fig 2: Mileage Display Screen - Since Reset (Long-Distance Memory)

The 4 wheel speed signals are evaluated for the travel distance. They are sent in the form of a message of the CAN engine compartment from the control unit for traction systems (N47) to the instrument cluster (A1). The travel distance is counted in parallel with the counting of the travel distance counter function of the instrument cluster (A1).

If the display of travel time or travel distance exceeds the maximum display value (99:59 h or 65.535 km (40.959 miles), the travel time and travel distance of the respective memory are automatically reset This preserves the relationship between travel time and mileage.

Reset, function		GF54.50-P-2010R
Kilometer / miles switchover, function		GF54.50-P-2002R
Instrument cluster (IC), operating information	Model 203.0/2	GF54.30-P-0002-05PP
	Model 203.7	GF54.30-P-0002-05PC
	Models 208, 210	GF54.30-P-0002-05B
	Model 215, 220	GF54.30-P-0002-05S
Instrument cluster (IC), networking of components	Model 203	GF54.30-P-0002-06PP
Displaying distance, function	Model 203	GF54.30-P-3022PP
	Models 208, 210	GF54.30-P-3022B
	Models 215, 220	GF54.30-P-3022S