Stationary heater/heater booster control module, location - GF83.70-P-4002-01A
WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2015 Mercedes-Benz G550, 2014 Mercedes-Benz G550, 2013 Mercedes-Benz G550, 2012 Mercedes-Benz G550, and 2011 Mercedes-Benz G550. However, it is still accessible from the selected car via links, so may be relevant.
Model 210 with stationary heater/ model 210 up to 31.08.96 with engine 602.982 with heater booster/model 463 as of 01.06.94 with stationary heater
The control module (A6n1) is an integral part of the heater. It forms an inseparable unit with the heat exchanger (1).
The control module/heat exchanger unit is bolted to the burner housing (2).
The control module is connected to the power supply and all electrical components on the stationary heater or heater booster by the multi-point connector.
The figure shows the stationary heater. The heater booster in model 210 up to 31 September 96 with engine 602.982 is identical in terms of design, however, did not have its own coolant circulation pump.