Stationary heater malfunction interlock reset, function - GF83.70-G-3038A

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2015 Mercedes-Benz G550, 2014 Mercedes-Benz G550, 2013 Mercedes-Benz G550, 2012 Mercedes-Benz G550, and 2011 Mercedes-Benz G550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 463 as of 1.6.94 with CODE (H12) Stationary heater Webasto Tele Thermo Top S

Function

Following a malfunction shut-off caused by a recognized malfunction, the heater goes to the malfunction interlock state. In this case it is necessary to reset the malfunction interlock after eliminating the cause of the malfunction. The stationary heater can be started again only in this manner.

Malfunction interlock reset
The malfunction interlock can be reset by switching off the heater and switching it back on again with the timer or the radio frequency remote control.
Malfunction interlock reset (as of 09/96)
The malfunction interlock can be reset with the hand-held tester (HHT) as of 09/96.
Malfunction interlock reset following malfunction switch-off due to overheating or electro-magnetic interference
In the event of a malfunction interlock caused by the heater overheating or by electro-magnetic interference, the malfunction interlock can be reset after eliminating the cause of the malfunction simply by interrupting the power supply. This can be accomplished by momentarily removing and reinstalling fuse 20 (F1f20).

	Malfunction shut-off		GF83.70-G-3037A
	Starting heater operation		GF83.70-G-2000A