Commissioning/base setting function - GF82.61-P-2000J

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2015 Mercedes-Benz G550, 2014 Mercedes-Benz G550, 2013 Mercedes-Benz G550, 2012 Mercedes-Benz G550, and 2011 Mercedes-Benz G550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 463 with CODE (ET6) Auto pilot system (APS4)

15.03.07

The document has been updated to this date and will no longer be subject to revision.

Commissioning

After a new APS navigation processor (A2/30) has been installed, the system has to be coded. Coding is carried out with the Hand-Held Tester (HHT). When commissioning, the following base settings have to be carried out.

Version coding vehicle data

Vehicle model
Condition of tires (new or used tires)
Version coding components
CD changer
Bose Sound System

Position

The position is entered at the APS radio and navigation operating unit (A2/29) or automatically by GPS positioning (takes 2 up to a max. of 20 minutes).

The APS cannot be used until commissioning has been completed.

For further information on this system see:

→ APS Operating Instructions

→ The auto pilot system of the new generation (product update publication)