ME-SFI deceleration fuel shutoff, function - GF07.61-P-4019AM
ENGINE 113.990 in MODEL 211, 219
ENGINE 113.991 in MODEL 215, 220
ENGINE 113.992 in MODEL 230 up to Model Year 2008
ENGINE 113.993 in MODEL 463 up to 31.5.12
ENGINE 113.995 in MODEL 230 up to Model Year 2008
The braking effect of the engine in the overrun mode is increased and the fuel consumption is reduced by means of the deceleration fuel shutoff.
In the overrun mode, the ME control unit switches off the fuel injection valves which are dependent on the coolant temperature as well as on the gear and rpm, if:
- Accelerator pedal not depressed
- Vehicle not in cruise control mode
The fuel injection valves are switched on again when the accelerator pedal is operated.
| Fuel injection valve, location/task/design/function | GF07.03-P-5004KE | ||
| Crankshaft position sensor, location/task/design/function | GF07.04-P-4116AM | ||
| Coolant temperature sensor, location/task/design/function | GF07.04-P-5026AM | ||
| ME-SFI control unit, location/task/design/function | GF07.61-P-5000AM | ||
| Accelerator pedal sensor, location/task/design/function | GF30.20-P-4010HA | ||
| Cruise control push-button switch, location/task/design/function | GF30.30-P-3100AM |