Brake hose connection on brake pipe modified - BT42.10-P-0001-01A
Models 129, 140, 202, 210
MODEL 129, 140, 202, 210 as of 1.9.95
Production breakpoint data/Modifications/New features
| Welt-Herst. Code | Typ | LL RL | Prod.-Work | Fg-IdentEnd-Nr. ab | Fg-Ident-End-Nr. bis | Prod.-Period From | Prod.-Period Until | Type and reason of the change | Reference/Remark |
|---|---|---|---|---|---|---|---|---|---|
| 129 | 09.95 | ||||||||
| 140 | 09.95 | ||||||||
| 202 | 09.95 | ||||||||
| 210 | 09.95 |
The hexagon on the connection of the brake hose on the brake pipe is not used anymore. There are now 2 elevations (arrow) on the connector which lock in the multi-tooth opening of the brake hose bracket. When tightened, the hose is prevented from turning by the brake hose bracket. When loosening, ensure that the brake hose bracket is not deformed.
The two versions are not interchangeable with each other .