Installing seat cushion for seat cushion length adjustment - AN91.25-P-0001-03A

Commercially available tools

Number	Designation
WH58.30-Z-1001-29A	Lever riveting device

Route rubber straps over shaped springs on cushion frame and hook into middle of rear-most spring.
Attach hooks in next to last hole in rubber straps.

Fig 1: Identifying Seat Cushion For Seat Cushion Length Adjustment
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Screw holder (15) for contact strip into holes on seat cushion frame with Phillip screws (16).
Fasten contact strip (17) to holder (15) with Torx screws (18).
After installing connect supply line for control valve cover for contact strip (arrow).
Fasten holder for control valve to seat cushion frame with rivet (inside of seat).

Fig 2: Locating Screw Holder For Contact Strip Into Holes On Seat Cushion Frame With Phillip Screws
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.