Converting door inner panel - AN91.60-P-0001-07A

Remove filler element (5), knock off plastic rivets (6) on inner panel (7).
Remove old inner panel from door liner.

Fig 1: Identifying Filler Element Knock Off Plastic Rivets On Inner Panel
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Attach new inner panel (8) and fasten with retaining rings (9).
Cut off excess length on pins.

Fig 2: Identifying Inner Panel And Fasten With Retaining Rings
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
After attaching door liner to door fasten additionally to side airbag holder with sheet metal screw (10).
Attach SRS airbag cover on screw hole.

Fig 3: Identifying Side Airbag Holder With Sheet Metal Screw
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.