Apply glue - AR67.10-P-1000-08K

1. When the heat-up time has expired, remove gluing cartridge from cartridge preheater, remove cartridge bottom and perforate diaphragm. Screw on the application nozzle and insert the cartridge into the application gun.

   Heat-up time min. 20 minutes

2. Guide nozzle along adhesive surface or residual glue on body flange while pressing a uniform quantity of glue out of the glue cartridge.

Height of glue bead approx. 13 mm

Install window within 5 minutes before adhesion of the glue starts decreasing.