Retrofit alarm siren - AN80.50-P-0001-02A

Model 210 as of 01.03.97

Repair materials

Number	Designation	Order number
BR00.45-Z-1003-05A	Preservation agent	A 000 986 72 70 05

Install mount (2) to alarm signal siren (H3/1) with bolt (1).

Fig 1: Identifying Alarm Signal Siren Components
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Position mount with alarm signal siren (H3/1) on longitudinal frame member in right wheelhouse as illustrated and mark mounting hole on longitudinal frame member.
Drill marked hole with ø 3.5 mm dia. bit.
Connect 3-pin connector (4) of ATA/AS wiring harness to alarm signal siren and tighten mount to longitudinal frame member with suitable sheet metal screw (3).
Apply corrosion protection agent to holes.

Fig 2: Connecting 3-Pin Connector Of ATA/AS Wiring Harness To Alarm Signal Siren
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.