Retrofitting roof antenna - AN82.70-P-8951-06A

Fig 1: Identifying Installation Tool I (210 589 04 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Installation Tool II (210 589 05 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Mark and drill hole for antenna as illustrated (e.g. with multi-stage countersunk drill).

Mask over white area of roof with adhesive tape or sheeting.

Do not use a drill for working out hole (risk of injury!)

When working out drilled hole, do not damage the roof.

Fig 3: Identifying Antenna Hole Dimension
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Arrest roof antenna (A2/22) from inside with installation tool I as shown in figure. Fasten antenna lead with felt.
Install antenna cover from outside with installation tool II.

Fig 4: Identifying Roof Antenna
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Connect antenna cable of telephone/voice control system wiring harness (1) to roof antenna (A2/22) and run in left roof area as illustrated. Stick connector (30) onto felt base.
Fix antenna cable in roof area and in area of left C pillar with felt (arrows).

Fig 5: Identifying Telephone/Voice Control System Wiring Harness
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.