Retrofitting headlamp cleaning system switch - AN82.15-P-0001-02A

Cut hole for headlamp cleaning system switch (S4/1) out of cover above heater or air conditioning control.

Fig 1: Identifying Headlamp Cleaning System Switch
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Plug headlamp cleaning system switch (S4/1) and cockpit switch group (S6/1) into connector strip (1) or heated front seat control module and connect wiring harnesses.
Clip connector strip or front heated seat control module in when installing cover above heater or air conditioning control.

Fig 2: Identifying Headlamp Cleaning System Switch And Cockpit Switch Group
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.