Signal systems fanfare horns diagnosis electrics - AD54.35-P-6000B

MODEL 208 as of 1.8.99, 210 as of 1.7.99 

	In order to avoid damage to control modules, couplings to control modules must only be disconnected or connected with ignition switched off. If a contact is bridged during a test, fuse-protected cables are to be used.
	Fanfare horns network of components		GF54.35-P-0001-02B
	Battery voltage 11-14V
	Fuses in order
	Systems in order
	Connection and use of test equipment		AD00.00-P-1000AZ
	Signal devices fanfare horns diagnosis, previous knowledge		AD54.35-P-2000A
	Testing
1	Fanfare horns, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-01B
2	Fuse and relay module, testing electrical system of Signal devices fanfare horns		AD54.35-P-6000-02A
3	Actuation module, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-03B
4	Ignition/starter switch control module, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-05A
5	Fanfare horns relay, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-06B
6	HHT interface, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-07A
7	CAN data cables, testing electrical system of signal devices fanfare horns		AD54.35-P-6000-08A